Pro-Tec Powder Paint is quick and easy to use. Simply heat your jig or lure and dip it in the powder. The powder will immediately melt on contact and bond to the metal for a smooth, even, high-gloss finish. The UV Blast clear coat paint makes lures and jigs flash by reflecting fish-attracting ultraviolet light. Fish can detect UV rays, which penetrate deeper than visible light in murky water, making baits more reflective. There’s no drying time, no odor, no solvents, no mess, no mixing, no thinning. Environmentally safe, it has an indefinite shelf life. Two ounces will paint about 450 3/8-ounce jigs. Comes in 2-oz. containers. Available:
I am using this powder paint on 1/32 oz to 3/4 oz jig heads. On the 1/32 to 1/8 oz heads I use a butane cig lighter to heat the lead head and then finish the cure in the old oven in the garage. The heads larger than 3/8 oz get the mapp gas torch just enough to get the powder to stick. Again, cure in the oven.
This stuff is easy to use, coats well and is durable. The only issue I have with the product is I would like to see larger containers or a spray powder type for larger items, such as downrigger weights.