The QuickDraw 360HT Rod Holder sports a unique pivoting design that actually helps set the hook by keeping tension on the fish. Since the inside tube pivots, it is twice as easy to remove the rod compared with conventional holders. Use the top cradle for casting and trolling rod/reel combos or the bottom slot for spinning combos. Since the innovative design positions rods at the optimum angle to the water, it performs perfectly with
light spinning gear when drifting and still-fishing as well as with heavier
gear when trolling.
Color: Sand.
We are so confident in our rod holders, we make a very unusual offer for this day and age. We invite you to field test any of our Cabela's rod holders for a period of 60 days. Compare them with any other rod holders regardless of price. If you are not 100% satisfied, return them for a full refund, no questions asked.
The QuickDraw 360HT Rod Holder sports a unique pivoting design that actually helps set the hook by keeping tension on the fish. Since the inside tube pivots, it is twice as easy to remove the rod compared with conventional holders. Use the top cradle for casting and trolling rod/reel combos or the bottom slot for spinning combos. Since the innovative design positions rods at the optimum angle to the water, it performs perfectly with light spinning gear when drifting and still-fishing as well as with heavier gear when trolling. Colors: Black, White, Gray. We are so confident in our rod holders, we make a very unusual offer for this day and age. We invite you to field test any of our Cabela's rod holders for a period of 60 days. Compare them with any other rod holders regardless of price. If you are not 100% satisfied, return them for a full refund, no questions asked.
Average Customer Rating:
4.4 out of 5
11 of 12 (92%) customers would recommend this product to a friend.
Customer Reviews for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
4
out of 5
Good product,August 11, 2009
By Superguidefrom Washington State
"I mounted these rod holders in the back of my boat and they have worked very well for Steelhead, salmon and Walleye. The rod comes out smooth, set the hook on the wat out."
Would you recommend this product to a friend? Yes
Review 2 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
4
out of 5
Finger Lakes Fisher,June 5, 2009
By CopperPullerfrom Finger Lakes, NY
"Great design, holds larger bait casters firmly and prevents rods from rotating in rod holder. Seems to be very strong, enough so to feel comfortable using to troll with magnum size dipsys. The only fault I have found is the 2 pins that allow tube to hinge protrude through tube. This becomes a problem if you are using a newer trolling rods with a larger rear grip. Rod can become stuck in tube or slight damage to rear grip can occur from pins gouging into sides of grip. I was able to push pins out slightly and still leave enough in tube to feel comfortable that they would not come off."
Would you recommend this product to a friend? Yes
Review 3 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Outstanding,May 26, 2009
By marine47from sacramento, california
"i love the quickdraw, it works great...i have switched out all 6 of my rod holders to the quickdraw! it makes it nice and easy to get it out when a big fish is on...."
Would you recommend this product to a friend? Yes
Review 4 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
4
out of 5
Quickdraw,April 20, 2009
By anjabufrom Grand Junction, Colorado
"Quick removal for setting the hook during trolling or still fishing."
Would you recommend this product to a friend? Yes
Review 5 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Great for the Kayak,March 24, 2009
By SooperSniperfrom Eglin Air Force Base, Florida
"I purchased 2 of these rod holders for my kayak as per a recommendation from a friend. They work great to stealthily remove and replace the fishing rods without making a lot of noise. I chose the no base option as I wanted to install them on a preexisting 3 rod holder bar made from another manufacture, perfect fit. I will be purchasing 2 more soon for the back of my Kayak. Great service, fast shipping, great product."
Would you recommend this product to a friend? Yes
Review 6 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Flush Mount Adaptor,November 19, 2008
By Nohufrom Honolulu, HI
"I have equipped my Boston Whaler with Lee's Vertical Mount Rod holders (chromed brass), which I salvaged from my 22' boat before I gave it away. Since I do a lot of deep sea trolling, and my present boat is not large enough to mount outriggers, I needed rod holders which would angle the rods outside of the boat wake. The combination of Quick Draw rod holders with the Flush Mount Adaptors did the trick. The Quick Draw allowed me to use my old Penn 6/0 reels with hardwood rod butts with gimble nocks on the ends. The Quick Draw allows me to remove the rod from the holder without having to reach too far outboard with the risk of dropping the rod overboard whenever getting a strike. The largest fish I have landed with my 6/0 outfits was a 250# Striped Marlin."
Would you recommend this product to a friend? Yes
Review 7 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
2
out of 5
not so great.......,October 22, 2008
By Fishchic36from FOLSOM, CA
"The quick draw rod holder didn't have a snug fit in the adapter, and the quick draw did not easily release the rod as described. Very disappointed. Sent them back."
Would you recommend this product to a friend? No
Review 8 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
QuickDraw Rod Holder,October 30, 2007
By Ulnitsfrom Denmark
"Simply one of the best - if not THE best - rod holder of all times. It does what it promises: Holds your rod securely when you need it. And lets go as reliably as it grips! Have four for my boat by now!"
Would you recommend this product to a friend? Yes
Review 9 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Strength,June 5, 2007
By Havikeyefrom Milwaukee, WI
"I've been using 6 of these rod holders fishing for salmon & trout on Lake Michigan and walleye on Winnebago. 4 flush mounts and 2 rail mounts. These are so easy to use and stow when finished. I was concerned of the strength while using them out the side with 9 foot dipsy rods trolling at 3 mph but they proved to have strength to spare, even when a 25 pound King struck hard. PHWEW!! The flush mounts are barely noticeable when out tubing or swimming with the kids. They were fairly easy to install. I will be buying a fuill set for my Brothers boat to upgrade his old school technology. I also recommended these to my neighbor who just bought a new 20 foot ranger and didn't want to drill holes. He installed 4 rail mount rod holders for trolling and drifting. Nothing but praise for the product."
Would you recommend this product to a friend? Yes
Review 10 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Quikdraw rod holders,April 17, 2007
By N2fishN
"I fish 200 days a year and have used quikdraw holders for 7yrs.I do a lot of catfish and wiper fishing both still & drift fishing and thy perform great.Whats nice about them is I take a lot of young kids and new fisherman out and they can use these with no trouble.
Great product!"
Would you recommend this product to a friend? Yes
Review 11 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
5
out of 5
Versatil and well built,November 30, 2006
By GChunterfrom Garden City, NY
"I bought a pair of these for my aluminum boat and used the oar lock mounts. These rod holders are very adjustable allowing me to set the angle properly for long line trolling or using Dipsey divers. They are very strong and easily handled the drag created when trolling a Dipsey. The oar lock mounts were also very solid and I had no problems with the holder shifting or coming loose.
The quick draw feature is great, if any of you have tried removing a rod from a holder in rough water with a salmon hooked on a Dipsey rod you know how awkward it can be. Simply lift on the rod and the holder releases making it much easier to slide the rod out of the holder."
Would you recommend this product to a friend? Yes
Review 12 for Cabela's QuickDraw Rod Holder - No Mounting Base
Overall Rating:
4
out of 5
Cabela's Quick Draw Rod Holder - No Mounting Base,November 27, 2006
By MrPsari
"I like these on my Canon down rigger. Easy to use on both convetional and spinning reels."
We are so confident in our rod holders, we make a very unusual offer for this day and age. We invite you to field test any of our Cabela's rod holders for a period of 60 days. Compare them with any other rod holders regardless of price. If you are not 100% satisfied, return them for a full refund, no questions asked.
