The only fletching jig with a helical designed for 2'' vanes. Gives you the perfect helical for Blazer® vanes or any 2'' vane. Increase accuracy and arrow flight. Jig has pre-set 3° helical built into the clamp. Designed for standard carbon arrow shaft diameters (from 17/64 to 23/64). Places three vanes 120° apart. Easy setup and operation.
The only fletching jig with a helical designed for 2'' vanes. Gives you the perfect helical for Blazer? vanes or any 2'' vane. Increase accuracy and arrow flight. Jig has pre-set 3? helical built into the clamp. Designed for standard carbon arrow shaft diameters (from 17/64 to 23/64). Places three vanes 120? apart. Easy setup and operation.
Average Customer Rating:
4.1 out of 5
9 of 11 (82%) customers would recommend this product to a friend.
Customer Reviews for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Bohning Blazer Helix Jig,September 10, 2009
By Sid3201from Ohio
"The helix is awsome. my broadheads have never been more true."
Would you recommend this product to a friend? Yes
Review 2 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Good Jig,September 9, 2009
By MAP3006from LIMERICK, PA
"Jig works great, arrow slides up a little sometimes out of jig, but just slide it back down when you put clamp down, quickly. I have done dozens of arrows without a problem. Puts nice vane down for good flight."
Would you recommend this product to a friend? Yes
Review 3 for Bohning Blazer Helix Jig
Overall Rating:
2
out of 5
Bohning Blazer Helix Jig,September 5, 2009
By 1Dan
"thought it took way too much effort to ensure that arrow remained in place while pressing vane onto arrow. arrow tends to slide forward out of nock receiver. some arrows came out ok, but many ended up with vanes different lengths from end of arrow."
Would you recommend this product to a friend? No
Review 4 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Great Fletching Jig,September 2, 2009
By BuffHunterfrom Southeick, MA
"The jig was quick and easy to use. Provided consistent placement of the fletching on the arrow shaft."
Would you recommend this product to a friend? Yes
Review 5 for Bohning Blazer Helix Jig
Overall Rating:
3
out of 5
Right Hand Helix,August 27, 2009
By Observedfrom NW PA
"It works very well, though the user has to ensure that the arrow is fully seated in the jig while applying the vane. Arrows have a tendency to get pushed out of place during that process. It wont work with real feathers, even the blazer sized ones. It seems expensive for such a simple plastic tool with a single 3 degree right-hand helix guide. I'd like to see more guides available."
Would you recommend this product to a friend? Yes
Review 6 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Nice product,August 26, 2009
By waldog10from Wisconsin
"The instructions were pretty straight forward. Cleaned up my arrows set the jig according to the instructions and had a perfrctly vaned arrow the first time. It worked like a charm."
Would you recommend this product to a friend? Yes
Review 7 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Jonathanb,August 10, 2009
By jonathanbfrom New Mexico
"Great product, easy to use"
Would you recommend this product to a friend? Yes
Review 8 for Bohning Blazer Helix Jig
Overall Rating:
1
out of 5
Poor preformance,August 4, 2009
By dhunter2145from WV
"This product is not worth the money, it does not apply enough pressure to the fletching to make a good contact. Fletching did not last but a few shots."
Would you recommend this product to a friend? No
Review 9 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Bohning Blazer Helix Jig,July 14, 2009
By huntboyfrom Southwest Missouri
"Puts just the right amount of offset to make blazer vanes fly great. Almost fool proof method of fletching those 2 inch blazer vanes."
Would you recommend this product to a friend? Yes
Review 10 for Bohning Blazer Helix Jig
Overall Rating:
4
out of 5
works great,July 6, 2009
By vertvettefrom Wesley chapel fl
"used to have my arrows fletched at a shop decided to try it myself easy to use and first ones done tryed then and a much tighter group was impresed"
Would you recommend this product to a friend? Yes
Review 11 for Bohning Blazer Helix Jig
Overall Rating:
5
out of 5
Helix Blazer Jig,May 6, 2009
By mfh1225from Hensley, AR
"I am new to archery as of Dec 08. The fletching on my arrows had a lot of wear so I decided to try and refletch them myself. I ordered the Blazer Helix jig and some 2" Blazers and created 6 perfect arrows in no time. They shoot great but I do notice a “hiss” with the helix twist and Blazer versus the old fletching which was a straight 2" type of vane but not Blazers. Anyway the jig worked like a charm and could not be easier. If you are looking for a little twist on your Blazers this is an easy way to get it."
