Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler
headstamp. Nosler Custom™ brass is prepped and weight-sorted for maximum accuracy and
consistency
potential. It also features chamfered case mouths, deburred flash holes, and comes sized and ready to
load.
Per 50.
Nosler Custom™ Rifle Brass
Item:9IS-216319
$26.99 – $62.99
Please use
the chart below to find your product and add it to cart
Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler headstamp. Nosler Custom? brass is prepped and weight-sorted for maximum accuracy and consistency potential. It also features chamfered case mouths, deburred flash holes, and comes sized and ready to load. Per 50.
Average Customer Rating:
4.8 out of 5
29 of 31 (94%) customers would recommend this product to a friend.
Customer Reviews for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Nosler is Top Brass,October 13, 2009
By spyceejojofrom Mitchell, SD
"Great product. Nosler is the best."
Would you recommend this product to a friend? Yes
Review 2 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Nosler 22-250 brass,August 24, 2009
By Birdman1944from New Mexico big game hunter
"All brass in excellent condition, loads very smoothly, I have not shot any yet but do not expect anything but tight groups."
"The best brass you can use. Needs almost no preloading prep. It's all I'll buy in the future. Cabelas shipping and packageing has gotten much better."
Would you recommend this product to a friend? Yes
Review 4 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Great Brass!,August 3, 2009
By IowaShotgunfrom Iowa
".204 Nosler Custom Brass. Very uniform and ready to load. Minimal runout after 3-4 loadings, no cracked necks or split cases. This stuff will last forever. I'm slowly replacing all my brass with it."
Would you recommend this product to a friend? Yes
Review 5 for Nosler Custom™ Rifle Brass
Overall Rating:
1
out of 5
They are not correctly neck sized,August 1, 2009
By UnhappyReloadfrom Denham Springs, LA
"I used this brass to reload and the standard deviation on my chrono was 21 fps. My load that I full sized was 10 fps.
I didn't think much of this and then I bought more and loaded a 30-06 and the bullet would just pull out of the case easily when tugged on after pressing my bullet in; some would not come out, but others easily came out. I seated the bullet plenty deep enough. They say this brass is "Ready To Load," but it is not, because it is not correctly sized.
Two instances, two problems:
1) Evidenced by bullet flying at different speeds (and the bullet grouping was therefor poor)
2) Bullet just coming out"
Would you recommend this product to a friend? No
Review 6 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Nosler brass,May 9, 2009
By Horseblack
"Being a reloader for over 30 years, I have used every makers brass,Norma,lapau,remington winchester ,you name it. With proper preparation most brass will preform well,however. Nosler brass needed no prep at all and produced groups as good as cases that were prepared to advanced levels. Groups of 1 inch or less at 300yds. are easily obtainable without hrs, of case prep work. I have used this in 300RUM and 7STW results were outstsnding in both calibers, I have been guiding and hunting in high country of northwestern Montana for several years where long shots are common. The only down side is availibity. Thanks to Cabela's for having Nosler brass in stock."
Would you recommend this product to a friend? Yes
Review 7 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
NOSLER BRASS,May 4, 2009
By KOW4from WYOMING
"I USE NOSLER BRASS IN MY .338 EDGE (300 RUM NECKED UP TO .338), MY .300 WIN MAG. THE 6.5 284 NORMA AND .243. IT IS WITHOUT A DOUBT THE MOST UNIFORM OF ANY BRASS ON THE MARKET. I WAS GOING TO USE LAPUA'S IN THE 6.5/284 NORMA AND ORDERED 200 CASES. I OPENED ONE BOX AND USED THREE FOR HEADSPACE ROUNDS FOR THE GUNSMITH TO CHAMBER WITH. I THEN STARTED WEIGHING AND MEASURING. AFTER CHECKING 25 IT WAS OBVIOUS IT WAS NOT THE QUALITY I HAD WITH THE 300 WIN MAG & .300 RUM BRASS IN THE .338. I BOXED IT UP AND RETURNED IT FOR CREDIT AND ORDERED 200 NOSLER 6.5-284 FOR USE. IT IS AS CONSISTENT ON WEIGHT AS NOSLER SAYS. IF YOU BUY IT BUY LOT #'S YOU CAN GET EVERY CASE THAT IS WITHIN .6 TENTH'S OF A GRAIN. ( 100 OR MORE CASES)REMINGTON, FEDERAL, WINCHESTER AND LAPUA & NORMA WILL BE LUCKY TO HAVE 100 CASES WITHIN 6OR7 FULL GRAINS ON ACTUAL CASE WEIGHT. THE WEIGHT CONSISTENCY OF NOSLER'S BRASS MEANS IT WILL HAVE A CONSISTENT POWDER VOLUME. IT COMES OUT OF THE BOX SIZED TO SPECS. TRIMMED TO LENGTH, CASE MOUTH CHAMFERED AND REAMED AND PRIMER POCKETS AND FLASH HOLES REAMED. IT IS READY TO SEAT A PRIMER AND LOAD. WHEN USING OR CHANGING TO NOSLER BRASS BACK-OFF YOUR LOADS FROM OTHER CASES THAT YOU HAVE USED BY @ LEAST 5%. IN 300WIN MAG AND 300RUM IT WEIGHS ABOUT 6-7 GRAINS HEAVIER THAN THE OTHER BRANDS AND THUS HAS A LOWER CASE CAPACITY. I WOULD RECOMEND IT TO ANY ONE FOR EVERY CALIBER IT IS AVAILABLE FOR."
Would you recommend this product to a friend? Yes
Review 8 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
300 RUM Nosler Brass,April 20, 2009
By hkp9s45from SC
"The only better quality brass would be Lapua. Since Lapua does not make the 300 RUM, this is the best brass for the 300 RUM.
Works great to size down to 338 RUM and the 338/300 RUM.
James"
Would you recommend this product to a friend? No
Review 9 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
best brass,March 17, 2009
By rlbshootfrom Northeast Ca.
"This stuff perfectly sized and length! All weighed inside my specs"
Would you recommend this product to a friend? Yes
Review 10 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Saves me hours of work,March 9, 2009
By SuperTrexfrom Fargo, ND
"Good reliable consistent brass that saves hours on initial preparation. I was skeptical, but I loaded it right out of the box and had great results."
Would you recommend this product to a friend? Yes
Review 11 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Great!!!!!,March 7, 2009
By mike6666666from BC, Canada
"I got some for my 300wby. Great brass!!! Some of the best i have used to date. 8 reloads and counting. Worth the money."
Would you recommend this product to a friend? Yes
Review 12 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
lofhic,March 3, 2009
By lofhicfrom maryland
"I have used Nosler Custom Rifle Brass in 223Rem.-22-250 Rem.and 260Rem. and can say, it's the most consistant brass I have used todate. It has shown excellent case-case weight,overall size,internal capicity and workability,as well as case life. When I do work on a shooters rifle, I allways suggest to them [ if they handload ammo] to use this brass. I have found no better!"
Would you recommend this product to a friend? Yes
Review 13 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
308 Winchester Brass,February 24, 2009
By Laszlo1from Western North Carolina
"Purchased 2 lots of 50 for a new Cz-550 in 308 Winchester. Brass is clean & prep work already done is A++. Random sampling reveals .7grain weight delta between cases sampled. All are exacting length & ready to prime & load. If I could change one thing it would be that they would come pre-annealed. No marks on the brass to indicate annealing was done. Will wait until they have been fired before running them thru a flame. Despite the lack of annealing I still gave 5 stars for their sorted weight & ready to load state."
"The same meticulous attention to detail that I give in preparing my own brass has been done for me! There was virtually no measurable difference in case demensions in all fifty cases. For me, the hefty price is warrented by allowing me to load and go...with premium crafted cartridges."
Would you recommend this product to a friend? Yes
Review 15 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
The secret brass.,January 16, 2009
By lowlightfrom idaho
"this stuff is better than lapua, norma, and winchester... they come weighed, and prepped to high reloading standards. I shot them 8 times before resizing, and I really didn't have to. I tossed them at 10 reloads, but they have quite a bit of life left"
Would you recommend this product to a friend? Yes
Review 16 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
22/250 brass,December 24, 2008
By 356winfrom Eatonville, WA
"It is good to see alternatives available to handloaders interested in accuracy. This brass in .22/250 was immediately expanded to the Ackley Improved chamber and has been sized twice since. Very nice balance in hardness and brittleness. I am looking forward to long service. I hope Nosler expands their offerings to other calibers. Many are cataloged but not available."
Would you recommend this product to a friend? Yes
Review 17 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Nosler Brass for 338 Winchester Magnum,December 15, 2008
By DexterZfrom Gresham, OR
"Weight of the cases varied by only 0.9 grains. Using maximum loads in my Kimber 8400 Superamerica produced easy extraction and no other signs of excess pressure. Accuracy is better than any other brass I have used."
Would you recommend this product to a friend? Yes
Review 18 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Excellent Product,November 28, 2008
By 7mmRemHunterfrom Minnesota
"This is definitely the best rifle brass I've used thus far. There were no dents or deformities, and the cases required no preparation."
Would you recommend this product to a friend? Yes
Review 19 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Worth The Money,August 12, 2008
By snocatn
"I always prep new brass very thorough. When I received and inspected these .308 noslers, I found them to be exactly what they claim, "ready to load." The flash holes were clear, the primer pockets were clean and consistent. Even the brass overall weight was extremely tight."
Would you recommend this product to a friend? Yes
Review 20 for Nosler Custom™ Rifle Brass
Overall Rating:
5
out of 5
Quality Brass,March 26, 2008
By HuntingForcefrom USA Armed Forces, Kaiserslautern, Germany
"As expected, this brass has the same quality as their bullets. It comes ready to prime and load. First look at this brass and you immediately see the quality and dedication that went into producing it. There is no need to trim, just prime it, load it, and go to the range to fire it."
