| Overall Rating: |
|
3
out of 5
|
Sportsman,
October 20, 2009
By RTNow
from Texas
|
"Bought this adjustable funnel for use in a 30 gal. feeder. The pre-punched holes are a good idea, but do not not work for the 30 gal. barrel. Had to take the funnel apart and re-work it to fit tight around the edges. Have re-installed in the barrel and so far so good. Has not clogged the spincaster like the barrel was doing before the funnel."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 2 for American Hunter Feeder Funnel
| Overall Rating: |
|
1
out of 5
|
American Hunter Feeder Funnel,
August 18, 2009
By Texasbornandproud
from Temple, TX
|
"This is a relatively cheaply designed funnel to fit various size barrels. The material is too light a gauge for this purpose. Assembly of the multi-purpose funnel was simple but a funnel that fits the exact size of drum would be more appropriate. I am concerned after filling my feeder that the funnel may have bent or collapsed.
A local feed store had a galvanized funnel for a few dollars more that I wish I would have bought. Just didn't want to go through the hassle of returning this one. It will do until I can replace it."
|
|
Would you recommend this product to a friend?
No
|
|
Review 3 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
A Must,
August 3, 2009
By 1Neal
|
"Easy to install and this is a must in converting a 55 gal drun into a feeder."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 4 for American Hunter Feeder Funnel
| Overall Rating: |
|
1
out of 5
|
hillbilly,
July 24, 2009
By whitetailhunter60
|
"No screws to install as advertised and after a very difficult installation process I had a gap between the barrel and funnel where a lot of my corn ended up..........buyer beware."
|
|
Would you recommend this product to a friend?
No
|
|
Review 5 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Funnel Feeder,
June 25, 2009
By catoperater
from Taunton,Ma
|
"Very easy to use and fit.I wish it was made out of plastic though."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 6 for American Hunter Feeder Funnel
| Overall Rating: |
|
4
out of 5
|
Funnel,
June 16, 2009
By 2Shotz
from Chicago, IL
|
"Pretty tight to turn and install. It seems it would be better used on a 55 gal drum."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 7 for American Hunter Feeder Funnel
| Overall Rating: |
|
2
out of 5
|
Don't waste your money,
May 27, 2009
By DewateringDude
|
"Came without screws. Flimsy. I used my own screws and it was too small for my military surplus barrell. Had I used it, I am not sure it would have held up to the weight of the corn. Keep shopping."
|
|
Would you recommend this product to a friend?
No
|
|
Review 8 for American Hunter Feeder Funnel
| Overall Rating: |
|
3
out of 5
|
good item,
April 21, 2009
By Anonymous
from Erath, LA
|
"good item if you own a rivet gun! but easy to install."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 9 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Feeder funnel,
March 28, 2009
By LuckyLouie
from CT
|
"The funnel works great. No more stuck corn on the bottom of the barrel."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 10 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Feeder,
March 17, 2009
By amateur1
from Md
|
"it works"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 11 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
AWESOME,
January 21, 2009
By disappointedhunter
from Wilmington DE
|
"Feeds the corn to the last kernal. Easy to install, no more mess at the end of the year. Should have purchased them years ago. Thank God there is no more shaking the drum."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 12 for American Hunter Feeder Funnel
| Overall Rating: |
|
4
out of 5
|
Feeder Funnell,
December 15, 2008
By AvidJoe
from Dallas, Texas
|
"Great product easy to install. Especially with no two drums being exactly alike this makes it easy! Proper tools are needed. Dewalt drill and your set in 30 minutes."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 13 for American Hunter Feeder Funnel
| Overall Rating: |
|
4
out of 5
|
American Hunter feeder funnel,
November 7, 2008
By Whitetail2
from NW Fla, lease hunter.
|
"Very economical, but would it kill them to include the sheet metal screws to size it to your drum application?"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 14 for American Hunter Feeder Funnel
| Overall Rating: |
|
1
out of 5
|
Feeder Funnel,
October 24, 2008
By BigTractor
from Arkansas
|
"Poorly designed. Would not fit over the leg kit properly. Expect to modify the sheet metal yourself to get it to fit."
|
|
Would you recommend this product to a friend?
No
|
|
Review 15 for American Hunter Feeder Funnel
| Overall Rating: |
|
2
out of 5
|
Great but...,
August 3, 2008
By bluefish2506
from Greensboro nc
|
"I bought four of these funnels to use in some metal feeders of mine. The funnels are one size fits all so you have to adjust it to your specific feeder which includes wrapping the sheet metal over itself until it is the proper size. Then you have to get it down into the feeder and lined up over the hole it the bottom. That is a lot easier said than done. However once it is in there it works great."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 16 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Very Good Product,
July 21, 2008
By agu1267
from texas
|
"I had no problems installing this funnel inside a 55 gallon feeder barrell. Pre drilled holes made the assembly easy."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 17 for American Hunter Feeder Funnel
| Overall Rating: |
|
4
out of 5
|
works well,
June 30, 2008
By docbryson
from nc
|
"the feeder funnel is easy to install. guides the corn to the center spout and is light weight.you must be careful to get it righr the first time you put it in the feeder it is hard to move around once it is in place."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 18 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Feeder Funnel,
June 16, 2008
By jlpierce
from Fort Worth. Texas
|
"This a Great product. I have used the plastic version for years. But this little dude is great. It's easy to install, But you will need a GOOD Pair of leather gloves as the metal is very sharp. But it fits tight in a 55 gallon barrel so you won't have any lose of feed due to deforming as is the case with the plastic type. Great deal!"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 19 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Dey Funnel,
May 5, 2008
By ElLobo
|
"This is a must have when building a feeder from scratch, well worth the money and all the work has been done for you by the manufacturer."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 20 for American Hunter Feeder Funnel
| Overall Rating: |
|
5
out of 5
|
Lar3,
March 9, 2008
By 88Dalejr88
from I am from penna and deer hunt every open day
|
"I purchased 1 of these funnels for a 55 gal drum. Excellent Product. I formed it, inserted the screws, dropped it in the barrel, lined up the funnel with the hole in the drum center, and inserted the 4 self tapping screws in the barrel to hold it in place. If you don't have a perfect drum, you will probably have problems,as I have read from other reviews. It took us about 20 minutes to install."
|
|
Would you recommend this product to a friend?
Yes
|
|
