|
Shop > Shooting Gear > Reloading > Presses & Dies >
You are here: Forster Co-Ax Reloading Press
The Co-Ax Press combines simplicity, strength and renowned Forster precision. The design of the linkage
and pivots eliminates torque on the head of the press and produces such amazing power, you can size
your cases full-length by operating the handle with one finger. You can switch from a sizer die
to a seater die in just two seconds with the convenient snap-in, snap-out exchange system. The top of the
stroke has a rock-solid stop for consistency of head space and bullet-seating dimensions. Dual floating
guide rods and Co-Ax Shell Holder Jaws guarantee perfect alignment. When a case is in the shell holder,
it's supported by spring-loaded jaws that float with the die for more positive extraction. Top priming
device seats primers to factory specifications. Spent-primer-catcher system passes all primers and fouling
carbon through a tube and into a container to keep all working parts free of grime and abrasives. No
frame supports or swinging primer arms. S Shellholder Jaws included with press fit 106 cartridges from
.17 Rem. to .458 Win. Mag. Press is compatible with all standard 7/8" x 14 thread dies.
Optional LS Shellholder Jaws fit a wide range of less-common calibers to supplement the S
Jaws included with Co-Ax Press.
The Cross Bolt Die Locking Ring tightens two ends of the ring instead of directly into die
threads for enhanced precision, and to eliminate damage and canting.
The Primer Seater moves freely in its channel with only .001" radial
clearance and is always at right angles to the case head, so primers are always seated straight, level and
at a uniform distance below the case head.
|
|
|
Please select from the following:
|
|
|
|
The design of the linkage and pivots eliminates torque on the head of the press and produces such power that you can size your cases full-length by operating the handle with just one finger. Includes S Shellholder Jaws that fit 106 cartridges from .17 Rem. to .458 Win. Mag.
|
|
Item: IK 211032
$239.99
|
|
|
|
LS Shellholder Jaws fit a wide range of less-common calibers to supplement the S Jaws included with Co-Ax Press.
|
|
Item: IK 212409
$22.99
|
|
|
|
Use this Forster Primer Seater with the Co-Ax reloading press to ensure primers are always seated straight, level and
at a uniform distance below the case head.
|
|
Item: IK 216999
$58.99
|
|
|
|
Cross Bolt Die Locking Ring tightens two ends of the ring for enhanced precision and a more reliable alignment with no canting. Fits standard 7/8" x 14 dies.
|
|
Item: IK 210525
$3.99
|
|
|
|
|
|
|
|
