| Overall Rating: |
|
2
out of 5
|
Quality ????????,
October 19, 2009
By commish
from Yonkers, New York
|
"bracket doesn't install easily. It doesn't fit properly over the lip on the receiver. I have to install it upside down so the adjustment screw is accessible. Once installed it keeps whatever is installed, quiet. But to swap from my ball hitch to my cargo carrier is no easy task. Also I have removed it only four times and its already starting to rust."
|
|
Would you recommend this product to a friend?
No
|
|
Review 2 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
3
out of 5
|
Anti Rattle bracket,
August 24, 2009
By WRizor
from Michigan
|
"I would recommend this product only if the manufacturer made changes to the design. The bracket is improperly designed. It would not fit over my receiver hitch because there was a nut welded to the inside of the bracket. I had to cut off the nut and weld a new one on the outside surface. It works fine now after I reworked it."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 3 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
anti rattle hitch adapter,
August 10, 2009
By gerry2324
from ny
|
"didn't even fit the receiver on my car a standard Reese class 3 ~ what a waste"
|
|
Would you recommend this product to a friend?
No
|
|
Review 4 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
4
out of 5
|
Anti Hitch rattle,
May 5, 2009
By VASaltwater
from Chesapeake, VA
|
"Not a bad product, does, at least for me, tighten at an angle and not straight up. Beats the heck out of shaking around. Bought two!"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 5 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
Anti-Rattle Hitch Bracket,
March 17, 2009
By DblAC
from Western Kentucky
|
"I use this on my Polaris Ranger. Prior to installing this product, my ball hitch would rattle on rough trails. This product worked perfectly and it was easy to install."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 6 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
3
out of 5
|
works okay but still needs some tweekin',
March 3, 2009
By DinkB
from Red River County, TX
|
"I get tired of a hitch rattling when pulling a trailer around the ranch and on gravel roads. I have tried putting shims and spacers in the hitch to keep it from rattling but they would compress or slip out. So I tried this product.
It does tighten up the hitch very well and holds it steady. But after a while, especially when driving through the pasture or down a rough road (which is about all we have around here) the bolt that holds the hitch tight will loosen and we're back to rattling again. I am going to try lock washers or some other ideas to see how that helps otherwise...
"It's a good idea but still needs a little tweekin' ""
|
|
Would you recommend this product to a friend?
No
|
|
Review 7 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
ANTI RATTLE BRACKET,
December 23, 2008
By QUACKERWACKER
from NO CENTRAL FL.
|
"BOUGHT IT TO HELP STABILIZE THE ATV HITCH BRACKET I JUST BOUGHT. THEY SHOULD ADD THIS AS A STANDARD PART OF THAT KIT. WORKS REALLY WELL OVERALL."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 8 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
4
out of 5
|
Had To Adapt To Make It Work,
November 23, 2008
By Babaw
|
"It did tighten up and stop the rattle/shake out of my bike rack. The only problem I encountered was that I had to grind down the outside lip on the receiver so that it would be flat and the bolt would tighten up flat instead of sideways. This is on a 2004 Jeep Wrangler."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 9 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
no more,
October 27, 2008
By mover
from california
|
"no more tick tick when trailer is not hooked up. what more can I say, it works"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 10 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
Anti-Rattle Hitch Bracket,
October 23, 2008
By rockie57
from Ajax Ontario Canada
|
"This product does not work if you have a hide a hitch because the bolt that has to down from the top has no room as the bumper is right there. You need a hitch that sticks out past your bumper for this device to work"
|
|
Would you recommend this product to a friend?
No
|
|
Review 11 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
Anti rattle hitch attachment from Valley.,
October 7, 2008
By Archerynut2008
from Madison, Oh
|
"I recommend this through Valley. It works like a charm and it is easy to install."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 12 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
Anti Rattle Hitch Bracket,
September 23, 2008
By DrGeorge
from Wilburton, OK
|
"The bracket stops all rattling and trailer does not jump or
go up and down when loading or unloading my ATV
(4 wheeler). In fact I've bought five (5) of them and have given two (2) away to friends. If you use a receiver type
hitch, it is a must. Thank you very much for giving me such
a useful item."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 13 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
anti rattle hitch,
September 23, 2008
By jarhead0811
from Pendleton,In.
|
"I have a 2007 Colorado Chevy truck and it would n't fit the receiver."
|
|
Would you recommend this product to a friend?
No
|
|
Review 14 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
anti rattle hitch bracket,
September 15, 2008
By asydow13
from Missouri
|
"Before purchasing be sure that you have clearance for the retainer screw that secures it. On my jeep it would not work due to a lack of clearance from the bumper. I am keeping the bracket since I am planning on purchasing another vehicle soon and hope that it will be usable with it."
|
|
Would you recommend this product to a friend?
No
|
|
Review 15 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
Anti hitch rattle,
September 3, 2008
By rpusnret
from Sheridan Wy.
|
"This product has a good design,but should have a fine instead of a coarse thread. mine stripped the nut the frist time i used it"
|
|
Would you recommend this product to a friend?
No
|
|
Review 16 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
3
out of 5
|
not bad but not great,
August 26, 2008
By yakfishattak
|
"It does what it says kind of. It stops the hitch from rattling but only has one bolt to hold the hitch up. Eventually the hitch shakes the bolt loose and then everything is rattling again. If you tighten the bolt about once a week you don't have a real big problem. Maybe if you had something like an impact gun then you might be onto something but I crank on that bolt and sure enough about 4 days later I hear a rattle. I have since found other products that are similar with three bolts to hold the hitch in place. You might want to explore one of these options."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 17 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
5
out of 5
|
Anti Rattle hitch,
August 14, 2008
By JMKDG
from Colorado
|
"Amazing product"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 18 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
1
out of 5
|
Poorly constructed,
August 11, 2008
By Dchap
from Port Orchard, WA
|
"I bought two anti-rattle brackets for the front and rear hitches on my 2500HD Chevy. As I was tightening the bolt (and wondering why it was still loose) I noticed that the top left corner weld was a cold joint - no actual metal to metal flow had occurred. Given the stresses that this unit will experience when a trailer is on the hitch and the poor construction I would not recommend it to anyone."
|
|
Would you recommend this product to a friend?
No
|
|
Review 19 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
2
out of 5
|
Didn't work for us...,
July 8, 2008
By Nitters922
from Mercersburg, PA
|
"This particular product didn't fit the hitch properly on our trailblazer. We were concerned about the rattling but it ended up that there was none so we didn't need it anyway. I kept the product just in case we would need it in the future for a different vehicle."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 20 for Anti-Rattle Hitch Bracket
| Overall Rating: |
|
3
out of 5
|
Anti-Rattle Hitch Bracket,
June 23, 2008
By MenloParkGuy
from Menlo Park, CA
|
"Good product, but the bolt that comes with it is to long to fit under the molded bumber of a 2008 Chevy Tahoe. Used it without the bolt...not sure if it did anything or not."
|
|
Would you recommend this product to a friend?
Yes
|
|
