Injection-molded of ABS polymer and ergonomically designed for a sure grip with the proper width, rearward angle and back swell. The shape, angle and finger notches promote painless shooting and positive control of the shotgun. Easy installation with no alterations required. 12-gauge only. Models: Winchester 1200/1300, Remington 870, Mossberg 500/600.
Injection-molded of ABS polymer and ergonomically designed for a sure grip with the proper width, rearward angle and back swell. The shape, angle and finger notches promote painless shooting and positive control of the shotgun. Easy installation with no alterations required. 12-gauge only. Models: Winchester 1200/1300, Remington 870, Mossberg 500/600.
Average Customer Rating:
3.8 out of 5
11 of 16 (69%) customers would recommend this product to a friend.
Customer Reviews for TacStar Tactical Shotgun Forend Grip
Overall Rating:
2
out of 5
TacStar Forend Grip,September 17, 2009
By RAABfrom Scottsdale, AZ
"This item was installed correctly per the rather vague instructions. After installing the action was decidedly "stiff" and difficult to operate. The device appears to force the slide assembly out of alignment and cause drag. The device has been removed and the original forend assembly reinstalled. The action now operates smoothly. I am very surprised and disappointed.
RAB"
Would you recommend this product to a friend? No
Review 2 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
Very nice,July 30, 2009
By Anonymousfrom Santa Clarita, ca
"Ive used the ATI pistol grip forend, along with many other forends, but as far as PISTOL GRIP forends go, i think this is the best one, i used this in conjunction with the Hogue Pistol grip which is also the most comfortable out of the many stocks ive used. This item i recommend if used with the Hogue Pistol Grip."
Would you recommend this product to a friend? Yes
Review 3 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
FUN,March 2, 2009
By Anonymous
"Reduced felt recoil, increased controlibility, and looks friggin cool!"
Would you recommend this product to a friend? Yes
Review 4 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
Good overall product.,March 2, 2009
By Sturmwehrfrom Hartford
"Picked up for a old Winchester 1200. Fits perfect,Looks as if its actually part of the gun. (Doesnt look cheap.) Comfortable for quick load outs.
Picked it up with tacstar pistol grip also for this 1200 and both work great, I am about to buy more tacstar...
I would recomend the slip on grips which I am ordering next for sure."
Would you recommend this product to a friend? Yes
Review 5 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
Very comfortable grip!,December 30, 2008
By mantix2140from Concord, Ca
"this forend grip is very comfortable with a nice wide backstrap and nice contours. The only draw back is that it is a pretty tight fit and can be a little difficult to install. Well worth it though!"
Would you recommend this product to a friend? Yes
Review 6 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
2
out of 5
TacStar Tactical Shotgun Forend Grip,December 29, 2008
By quickdrawmatty
"Very unstable. Feels like it's going to fall off. If your looking for a cheap tactical Forend that's what this is. Sorry TacStar but hey your pistol grip works well."
Would you recommend this product to a friend? No
Review 7 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
Very Good Forend,July 8, 2008
By GriffDawgfrom Virginia
"I am very pleased with this product. Makes my Mossberg look cool and is very comfortable when using. I would recommend it."
Would you recommend this product to a friend? Yes
Review 8 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
use by partially handicapped,July 4, 2008
By majordadfrom Tucson, AZ
"I purchased this as I haverestrictive movement of my left shouder and cannot proprly hold the forepiece ofa weapon and must let it rest on top of my fist. This allow me to have much greater control of the gun and properly hold the pistol grip. I have much bettr control and my accuracy has improved greatly. I still have a difficult time being able to pump a pump shotgun. I would like to see them expand the line to include a similar unit for automatic shotguns."
Would you recommend this product to a friend? Yes
Review 9 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
2
out of 5
Loosey Goosey,June 1, 2008
By DancingRiversfrom Aurora, Co
"I installed the forend grip on my Mossberg tactical shotgun. The instructions were sketchy at best. When I went to operate the action, the grip came loose. I couldn't see any way to secure it to the gun. It looked nice, but the mechanics not so much."
Would you recommend this product to a friend? No
Review 10 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
5
out of 5
Tac Star Forend Grip,February 8, 2008
By adaris
"Vast improvement over the standard grip that came with my Winchester 1300."
Would you recommend this product to a friend? Yes
Review 11 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
2
out of 5
Does its job, but not great,October 30, 2007
By Mike82934from Southwestern Wyoming
"I installed this forend grip in conjunction with the Tacstar rear pistol grip, and together they make a decent pair for a tactical shotgun. One of my complaints about this product is the low manufacturing quality, which was also a problem with the pistol grip (untrimmed mold lines down the center, and some slight warping). It did not harm the function of the rear grip, but it caused the top of the forend to rub along the bottom of the barrel. It was still functional, but there was noticable friction as the slide was operated. It will wear in after awhile, but at the expense of your barrel's finish. If this doesn't bother you, it's a fair buy, and like I said, still functional; It's just not ideal."
Would you recommend this product to a friend? No
Review 12 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
4
out of 5
Nice,August 21, 2007
By 76patriotfrom Cape Cod Massachusetts
"I would have given this product a 5 star rating if the instructions would have been just a little bit closer to being the right way to install this product... Luckily I knew more about my Mossberg 500 than TacStar did, or I would have been taking way more apart on my shotgun than needed to come apart."
Would you recommend this product to a friend? Yes
Review 13 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
4
out of 5
TacStar Tactical Shotgun Forend Grip,June 3, 2007
By Jeff2000
"I mounted the TacStar on a Mossberg 500 and had a chance to test it at the range yesterday. It worked great."
Would you recommend this product to a friend? Yes
Review 14 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
1
out of 5
Overpriced, perhaps too large.,February 2, 2007
By stevemisfrom Raleigh, NC
"This item is WAY overpriced. It's incredibly cheaply made -- it's hollow, black hard plastic and has gigantic seams left over from the injection molding process. Honestly, this item shouldn't sell for more than $5.
The grip itself is rather large -- perhaps twice the size of the factory pistol grip that came on my Mossberg 500. I'm afraid it might be too large for my wife to grip comfortably, although time will tell."
Would you recommend this product to a friend? No
Review 15 for TacStar Tactical Shotgun Forend Grip
"A must if buying the six extra shell holder! The standard forend grip hits the addon side shell holder. This was not hard to install with just a little patience. Good directions and tool included to remove and install forend grip. Feels good in the hand and is easy to reload a fresh shell. Looks cool if trying to build a SWAT style shot gun! Check out the other TacStar parts for your shotgun."
Would you recommend this product to a friend? Yes
Review 16 for TacStar Tactical Shotgun Forend Grip
Overall Rating:
4
out of 5
Thumbs up to forend grip,November 21, 2006
By X90Mikefrom Lewisville, TX
"I own a Winchester 1300 series 12 gauge shotgun w/ a pistol grip. The TacStar forend grip makes the recoil easier to handle, especially when firing 3" shells. The front end of the gun wants tokick upward, and it's a lot easier to control with the TacStar than holding onto the pump. Installation was simple, and took just a few minutes. The only downside I can see is that the grip seems to flex a bit from side to side. Overall, I definitely recommend this product."
