| Overall Rating: |
|
4
out of 5
|
shotgun case,
November 20, 2009
By Anonymous
from minnesota
|
"not a bad case but as others have said it can be a tight fit. if you have a 21" barrel AND accessories added to shotgun, i don't believe it will work for you. i have a mossberg 500 with pistol grips and a reciever mounted 6 shell holder and 18" barrel and it is a very tight fit. must store gun opposite of picture shown in order to close. TACSTAR needs to add another 2 inches to length and 2 inches to height. then it'd be perfect."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 2 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
4
out of 5
|
Good but requires consideration of gun length,
November 19, 2009
By Petrov
|
"So far I would say that this is a decent product, but double check the length of your gun in realtion to that of the case. My 870 pistol grip with 18" barrel is very snug and just fits! Otherwise its been good for the 5 months I have owned it."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 3 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
Shotgun case for Snake Charmer,
October 7, 2009
By OneBigFella
from Mid South
|
"I have been looking for a case for my single shot .410 Snake Charmer. This fits the bill. Thanks Cabela."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 4 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
TacStar Pistol Grip Shotgun Case,
August 18, 2009
By woodbores
from PA
|
"Great price. Works as advertised. It gets a little tight after adding a laser sight and mounting bracket (added to the width of the shotgun), but still workable."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 5 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
4
out of 5
|
Good case,
May 4, 2009
By tnmountie
from Johnson City, TN
|
"This case is a good fit for my shotgun as it is now. I do plan on purchasing a fore-end light for it and it appears that it might be a tight fit with the modification, but I believe it will still fit. A heavier duty zipper might be good also, but otherwise I am pleased with it."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 6 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
tacstar pistol grip shotgun case,
March 30, 2009
By santa4
from henderson Nv
|
"excellent fit for my pistol grip shotgun. I can also fit two boxes of 5 shells one slug one buckshot and my uncle mikes shooting gloves. What more can you ask for"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 7 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
3
out of 5
|
not good if red dot is mounted to gun,
March 28, 2009
By dan911
|
"good quality, well padded, beware width is limited.
My gun with pistol grip and red dot sight won't fit with sight mounted to gun."
|
|
Would you recommend this product to a friend?
No
|
|
Review 8 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
Love This Case,
March 17, 2009
By COWBOY815
from New York
|
"Perfect fit for my dual pistol grip remington 12 guage shotgun. Nice thick padding, good price."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 9 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
excellent,
September 2, 2008
By Anonymous
|
"Works great fits my mossberg cruiser perfect."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 10 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
3
out of 5
|
Tight fit,
August 18, 2008
By sigma493
from Boise City,OK
|
"The shot gun just barly fit and was extremly tight in case might not work if uing 10 round mag extension. the zipper came apart once but was a easy fix and no other problems"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 11 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
4
out of 5
|
TacStar Pistol Grip Shotgun Case,
July 17, 2008
By FlossyB
from Tucson, AZ
|
"I think the case is a good buy. As other reviewers have said the case is a very tight fit. A Little bit of a pain, but I like this better than other cases I have seen."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 12 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
TacStar Pistol Grip Shotgun Case,
July 7, 2008
By Willeyboy
from Oregon
|
"My Mossberg 500A with pistol grips fore and aft fit into
this case perfectly. A good snug fit."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 13 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
1
out of 5
|
poor,
March 24, 2008
By ED175
from Joplin, Mo.
|
"The pistol grip shotgun case is to small for my shotgun with a top folding stock, and pistol grips."
|
|
Would you recommend this product to a friend?
No
|
|
Review 14 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
TacStar Pistol Grip Sotgun case,
March 10, 2008
By CasperBoo
from Alabama
|
"This is nice! A bit snug, but that's the way I like it! Seriously well worth the price especially since there aren't that many out there to chose from."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 15 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
3
out of 5
|
TacStar Pistol Grip Shotgun Case,
January 16, 2008
By teezr
from Denver, CO
|
"It's the only case I was able to find that was suitable for my Mossberg 500. The only problem I have found is that with a tactacle style forarm (as shown in their picture) it is a very tight fit."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 16 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
3
out of 5
|
TacStar Pistol Grip Shotgun Case,
September 25, 2007
By Lynchfactor
|
"Padding is nice and thick, and nylon cover is heavy duty, but the zipper is cheap plastic and undersized for this application. I can imagine it starting to separate with time and repeated use. The case fits my Mossberg 500 w/ 18" bbl and pistol grip perfectly. I would recommend it only because I haven't found anything better to this point--but I'm still looking."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 17 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
Good Product,
July 23, 2007
By midwestman
from Missouri
|
"The Case is made very well,And keeps the shotgun secure."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 18 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
1
out of 5
|
TACSTAR,
November 25, 2006
By N0NAME
|
"This is one product that failed to meet my expectations. It is not a very well made gun case. It is almost too small for a pistol grip shotgun with no accessories. It is much to small for a pistol grip shotgun with a folding stock and shell holder."
|
|
Would you recommend this product to a friend?
No
|
|
Review 19 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
5
out of 5
|
Excellent,
November 21, 2006
By Friday
from Nashville, TN
|
"I am very much pleased with the tight fit and quality of the merchandise. No wasted material in this product."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 20 for TacStar Pistol Grip Shotgun Case
| Overall Rating: |
|
4
out of 5
|
Great Product,
November 20, 2006
By till44
from Sandpoint, ID
|
"This case is well padded and provides great protection for your shotgun. Make sure that you measure your own gun and compare the measurements of the case, mne just barely fit. It is a nice tight fit, which I like because the shotgun is nice and stable in the case."
|
|
Would you recommend this product to a friend?
Yes
|
|
