| Overall Rating: |
|
5
out of 5
|
HONDO1,
November 3, 2009
By HONDO1
from MCCOOK NEBREASKA
|
"GOOD BRASS ONLY HAVE RELOADED 20 ROUNDS WITH THEM BUT HAD NO PROBLEM"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 2 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
3
out of 5
|
You get what you pay for...,
November 2, 2009
By someoneinpa
from Central PA
|
"Purchased two bags, one in 444 Marlin, one in 30-30.
The 444 cases were beat up pretty badly and the lengths varied quite a bit. Some mouths were bent into half-moons. Also seemed a little thinner than the Hornady once-fired brass that I've used in the past. The primer pockets also seem a bit loose (using Win WLR primers). These would have gotten a 3.5 star alone.
The 30-30 cases were also beat up pretty good, but not nearly as bad as the 444 cases. The quality issue here has been that the cases are not well-formed internally. You look down the necks and see globs of brass at the bottom near the sides, and the primer holes are not uniform or consistent. They will work, but it's the worst quality brass I've ever used. The globs and non-uniform internals concern me a bit as it may affect the pressure or case strength. Would have given these a 2.5 star alone.
The average is 3 star, so that where this review sits. Most seem to like this brass, maybe I got a bad batch, though that's unlikely across two completely different calibers. Maybe I just have higher expectations, though this brass is worse than nearly all once fired factory brass as well (had some Winchester once fired that had bad necks at the crimp, those are the only ones worse in my experience thus far.
I'll probably end up using Hornady in the future barring any financial crisis. Their brass seems to hold up better and be much more consistent and uniform, so more up front cost, but more reloads out of the batch and more consistent results.
Watch out for Winchester brass, I've not used it myself, but have seen many reviews with similar experiences to this experience with the Remington brass."
|
|
Would you recommend this product to a friend?
No
|
|
Review 3 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Unprimed rifle brass,
November 2, 2009
By 7STW
from Kansas City, MO
|
"I purchase all of my new reloading supplies from Cabelas their product pricing is very competitive and cheaper than other large stores. I always purchase unprimed brass from Cabelas. The employees are very helpful and I always enjoy shopping at Cabelas. Keep up the great job. Thanks"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 4 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Remington 30-06 Brass,
November 2, 2009
By Bullkiller2
from Albuquerque, New Mexico
|
"I have not had any problems with this product. No difficulties in reloading or shooting. I will buy some more when the need arises."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 5 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Great Brass,
October 27, 2009
By GRMIXOYE
from Waynesboro, VA
|
"Never had any problem with Remington brass...you can buy more expensive brass...but why!?"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 6 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Buy American,
October 26, 2009
By 84Nemo
from Northwest NJ
|
"I have used Remington brass for reloading for more than 30 years and the quality is still just as good as when I started."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 7 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
remmington unprimed rifle brass,
October 24, 2009
By dogbert5101
from california
|
"reliable dependable and great for reloads"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 8 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Very good,
October 22, 2009
By grunkybouy
from Picayune, MS
|
"I am new to the .338 world and was amazed at how expensive loaded .338 RUM was if I could even find it. So, I decided to build my own. All of the brass was very consistant. Weights, dimensions were all good. I will buy more."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 9 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
300 wby brass,
October 20, 2009
By Jedwork
from Aberdeen, SD
|
"I have loaded 40 rounds of the remington brass. To my surprise the cases seem to be very consistent. I have had no trouble with sizing or length. Time will tell if it will hold up to multiple loadings as well as factory wby brass, but a half the price you cant go wrong."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 10 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
the good stuff,
October 19, 2009
By spiritrider
from pahrump, nevada,in the bowels of the mojave desert
|
"i recently purchased this Unprimed rifle brass and have already used several casing , i reload my own brass and i find the Remington is just what i needed to use on the ammo i reload, thanks Cabela's for providing this product when you have them in stock, it's not easy getting any thing for reloading right now."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 11 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
3
out of 5
|
300 brass,
October 13, 2009
By steve1965
from El Paso Tx, hunt Tx, NM and Colo.
|
"Needs better packaging, I found several rounds with nicks and several with oval necks. Every round was usable and no jams after using 20 rounds."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 12 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Good product at a good price,
October 1, 2009
By MMOutfitters
from Kansas
|
"Good quality product offered at a fair price."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 13 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
4
out of 5
|
Good,
September 25, 2009
By ZIGhunter
from Southern California
|
"I use on 7mm Rem Mag and 338 Win Mag, also 30-06. Works good. I neck size to Redding bushing dies, trim to length, then load because of denting of necks in the bulk bags they are shipped in. I usually get 5 to 7 loads for each piece depending on how hot the loads are and depending on the caliber."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 14 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Remington .223,
September 11, 2009
By L30N
from Sacramento, CA
|
"The brass came in clean and unprimed. All I had to do was load it. There were no defects and the rounds cycled cleanly through the chamber. I would buy Remington brass again..."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 15 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
remington rifle brass,
September 10, 2009
By not2ez
|
"Good stuff."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 16 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Remington Brass,
September 10, 2009
By hammrp
from Yorktown, Virginia
|
"Product is exactly as expected, Works fine and of good quality. What else would you expect from Remington."
|
|
Would you recommend this product to a friend?
No
|
|
Review 17 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Remington Brass,
September 1, 2009
By MSUHunter318
from Starkville, MS
|
"Brass cleaned up good as new and reloaded as expected"
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 18 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
M1 Carbine Brass,
August 24, 2009
By KYCOL
from Morgantown, KY.
|
"This brass has been difficult to find recently. Cabela's has it at a good price and delivery was very quick. The item arrived in perfect shape."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 19 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
4
out of 5
|
working on fine tune grouping,
July 31, 2009
By VAPatrick
from VA
|
"I am no expert mind you. This brass is producing constant shot groups. producing .390-.420 5 shot groups at 50 yds and feel confident that some 1/10 grain fine tune will produce better.
40,52, and 55 gr. bullets working well with this brass. Necks show some irregular shape and I resize/ shape all before reloading."
|
|
Would you recommend this product to a friend?
Yes
|
|
Review 20 for Remington Unprimed Rifle Brass - Per 100
| Overall Rating: |
|
5
out of 5
|
Remington 300 Ultra Mag Brass (100),
July 23, 2009
By geowood
|
"I have purchased New 300 RUM brass from several outlets.
However, the 2 X 100 baged, Remington brass is the best ,Cleanest and Freshest, closest to specs, I have ever reloaded. Thanks Cabelas and Remington for a superior product !"
|
|
Would you recommend this product to a friend?
Yes
|
|
