All MEC reloaders incorporate features that produce shotshells that will outperform factory loads at a
fraction of the price. These top-quality features include: flip-top measure to permit powder and shot
containers to be inserted or removed without spillage, adjustable rammer tube for applying proper
wad-column pressure, cam-operated crimp for precise crimping and closing pressure, automatic
primer feed, Spindex2 crimp starter for automatic rotation and realignment on the original factory
crimp.
The 650 delivers maximum performance with minimum effort, and a separate resizing operation for
shooters who wish to inspect each shell for precision. Works six shells in various stages at a time. Each
handle stroke produces a shell rivaling factory loads. Includes new MEC Progressive Primer Feed. Three-stage crimping. The final station tapers the shell to assure smooth feeding.
Available: 12 gauge, 16 gauge, 20 gauge, 28 gauge and .410.
All MEC reloaders incorporate features that produce shotshells that will outperform factory loads at a fraction of the price. These top-quality features include: flip-top measure to permit powder and shot containers to be inserted or removed without spillage, adjustable rammer tube for applying proper wad-column pressure, cam-operated crimp for precise crimping and closing pressure, automatic primer feed, Spindex2 crimp starter for automatic rotation and realignment on the original factory crimp. The 650 delivers maximum performance with minimum effort, and a separate resizing operation for shooters who wish to inspect each shell for precision. Works six shells in various stages at a time. Each handle stroke produces a shell rivaling factory loads. Includes new MEC Progressive Primer Feed. Three-stage crimping. The final station tapers the shell to assure smooth feeding. Available: 12 gauge, 16 gauge, 20 gauge, 28 gauge and .410.
Average Customer Rating:
4.5 out of 5
6 of 6 (100%) customers would recommend this product to a friend.
Customer Reviews for MEC® 650 Reloader
Overall Rating:
5
out of 5
Excellent,January 3, 2009
By ad13from Goodland, Kansas
"The only thing that isn't a five star is the resizer. It is a poor design so ordered one separately."
Would you recommend this product to a friend? Yes
Review 2 for MEC® 650 Reloader
Overall Rating:
5
out of 5
GREAT RELOADER,October 23, 2008
By PITTYPATDUGANfrom GA
"FOR MOST RELOADING THIS IS GREAT. yOU CAN LOAD A BOX IN 5 MINUTES, yOU DONT HAVE AS MANY ACCIDENTS AS YOU DO WITH THE mec 9000"
Would you recommend this product to a friend? Yes
Review 3 for MEC® 650 Reloader
Overall Rating:
3
out of 5
650 Reloader,May 5, 2008
By frf1from Texas Panhandle
"worked overall well, except there was not a station that would resize the brass. This has proven to be a problem with one of my guns."
Would you recommend this product to a friend? Yes
Review 4 for MEC® 650 Reloader
Overall Rating:
5
out of 5
Great Loader,February 1, 2008
By IDSHOOTERfrom Burley, ID
"I just got a 28 guage 650 and it works great. Once it is bolted down it takes about twenty minutes to make the neccesary adjustments and you are off and running! Recommend getting the universal charge bar to go with it."
Would you recommend this product to a friend? Yes
Review 5 for MEC® 650 Reloader
Overall Rating:
4
out of 5
650 Progressive loader,January 16, 2008
By dln22from Alberta
"Great - should have bought one years ago. I have been reloading with a single stage loader for over 35 years and made out ok, but this loader is a real treat. The only down side is making the adjustment of the repriming station which has to be adjusted for each type of hull, because the height of the base wad is not the same in all hulls. However, once adjusted and if you stick to the same hull type it works great. I have used WWAA and Rem STS hulls and the repriming adjustment is different for each. This is necessary to engage the charge bar (shot & powder) actuator. With these two hull type I have not had to resize hulls for use in my O/U. Note: When setting the repriming station do so without the powder & shot bottles in place (tip off or remove) or you will have powder and shot everywhere (personal experience)."
Would you recommend this product to a friend? Yes
Review 6 for MEC® 650 Reloader
Overall Rating:
5
out of 5
MEC 650 Reloader,January 12, 2008
By perkytxfrom Mont Belvieu, Texas
"This is a great product for first time users. I had 3 setup at one time. A person can produce a box of shells in less than 5 minutes. If you are interested in the quality of shells you produce, you cant go wrong with this one. A must have."
