All MEC reloaders incorporate features that allow you to produce shotshells that will outperform factory loads at a fraction of the price! These top-quality features include: flip-top measure to permit powder and shot containers to be inserted or removed without spillage. Adjustable rammer tube for applying proper wad-column pressure. Cam-operated crimp for precise crimping and closing pressure. Spindex2 crimp starter for automatic rotation and realignment on the original factory crimp.
The 77 Sizemaster is the finest single-stage reloader that MEC builds. Reloads 2-3/4" and 3"; paper
and plastic; trap and field loads. Revolutionary resizing chamber resizes high- and low-brass shells
back to original factory specifications. Cam-operated crimp adjusts for correct crimping and closing pressure exactly on the original factory crimp. Can be changed from six- to eight-point crimp in a matter of seconds. Automatic primer feed. Prevents spilled powder and shot by "remembering" the proper reloading sequence. Long-stroke mechanism allows loading high- or low-brass shells including, with a quick adjustment, 3" shells. Comes with charge bar for loading trap or light hunting loads and complete instructions. Other charge bars and powder bushings purchased separately.
Available: 12 gauge, 16 gauge, 20 gauge, 28 gauge and .410 (.410 does not come with the Automatic Primer feed).
All MEC reloaders incorporate features that allow you to produce shotshells that will outperform factory loads at a fraction of the price! These top-quality features include: flip-top measure to permit powder and shot containers to be inserted or removed without spillage. Adjustable rammer tube for applying proper wad-column pressure. Cam-operated crimp for precise crimping and closing pressure. Spindex2 crimp starter for automatic rotation and realignment on the original factory crimp. The 77 Sizemaster is the finest single-stage reloader that MEC builds. Reloads 2-3/4" and 3"; paper and plastic; trap and field loads. Revolutionary resizing chamber resizes high- and low-brass shells back to original factory specifications. Cam-operated crimp adjusts for correct crimping and closing pressure exactly on the original factory crimp. Can be changed from six- to eight-point crimp in a matter of seconds. Automatic primer feed. Prevents spilled powder and shot by "remembering" the proper reloading sequence. Long-stroke mechanism allows loading high- or low-brass shells including, with a quick adjustment, 3" shells. Comes with charge bar for loading trap or light hunting loads and complete instructions. Other charge bars and powder bushings purchased separately. Available: 12 gauge, 16 gauge, 20 gauge, 28 gauge and .410 (.410 does not come with the Automatic Primer feed).
Average Customer Rating:
4.8 out of 5
25 of 25 (100%) customers would recommend this product to a friend.
Customer Reviews for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
Nice reloader,November 15, 2009
By Flyynsquirrelfrom New Carlisle Indiana
"Bought this reloader Last month.....After a couple of minor adjustments I was under-way...I load at least 150 shells a week and have had no problems yet...Now I need one for 20 gauge...."
Would you recommend this product to a friend? Yes
Review 2 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
77 sizemaster,November 4, 2009
By masterreloader
"works great. replaced an old pacific reloader. about time!! also bought bottle supports which i think was wise."
"Great product! easy to use and fast for a single stage reloader. Great complement to my Mec 650 12ga. and Mec Jr. 20.ga. Quality of reloads comes close to factory shells."
Would you recommend this product to a friend? Yes
Review 5 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
MEC 77 Sizemaster,August 3, 2009
By Chief701from Ada, Oklahoma
"I can't say enough about this reloader. It is an excellent product from a fine company. This is my third MEC, and I expect it to last a lifetime for me. It came set up perfectly from the factory, with the exception of the primer feed, that took a minor adjustment to get the primers to drop properly. Of course, I had to install the primer feed anyway, so it was not an issue. MEC builds an exceptional product, and the ONLY one to buy in my opinion. I would purchase the optional bottle support though, as in my opinion, it is an absolutely necessity. I ordered the bottle support, bottle fill funnel, and extra bushings. The shot bottle is so tall, that without the support, I believe that the bottle neck would break off when laying it down full of shot. I highly recommend this product"
Would you recommend this product to a friend? Yes
Review 6 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
bowhunter55,July 6, 2009
By bowhunter55from Cleveland TN
"The 77 sizemaster in 28 gauge is just right for me I can load about 4 boxes in an hour wiht out being rushed. I tried 3 different hulls and they all worked fine. If you are tired of paying about ten bucks for a box of 28 gauge shells try a mec 77 sizemaster. You can shoot your 28 gauge without hurting your pocket book."
Would you recommend this product to a friend? Yes
Review 7 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
28 ga Sizemaster,June 15, 2009
By nmoonfrom Virginia
"Good reloader, easy to set up and use. Primer feed takes a few times to adjust, but once it is set it works great."
Would you recommend this product to a friend? Yes
Review 8 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
Sizemaster for beginners,April 7, 2009
By ShooterDadnotSoccerMomfrom Northern California
"I can not imagine a better reloader to start off with. I've dressed my MEC 77 up a bit with an optional bottle support which I think is a valuable asset. Not that it doesn't work well without one, but I have spilled small quantities of shot and powder. It's unavoidable to all but the luckiest of us. I can only imagine what disappointment might be inherent if the bottle were to break at the neck. Not knocking the bottles. They are tough as nails, but sooner or later, all plastics degrade. I'm just getting a little ahead of the curve. Also I've added the universal charge bar which allows me to tune the charges to near perfection. I did a lot of research before I purchased my MEC 77 and heard some concerns regarding the calibration bands not being engraved as they were in the past on the universal charge bars. Apparently the calibration tape which has replaced the engraving is prone to coming off or unwinding. Naturally once any particulate adheres to the adhesive face of the tape it renders it relatively worthless. So before I even installed it, I cut several bands of clear tape and overwrapped it. I'm sure that it will never unwrap now. At this point I've only reloaded a thousand or so, but as I've stood there using it, I have come to realize that it is about 99 percent foolproof. I can not put my finger on the 1 percent, but never say never. I understand that the progressive relaoders are faster but mistakes can go unnoticed due to the fact that you can not watch seven things at once. I'm also not knocking them. I am very conscientious about safety and chose to have as much control factor built in as is possible. I don't shoot much myself. My 13 year old on the other hand shoots a case plus EVERY WEEKEND. He and I scienced it out completely and thoroughly within 2 hours and the loads have remained within my design parameters without exception. The only thing that I see that could go wrong would be accidentally dropping a second primer into an already primed shell just prior to dropping in your powder charge. To avoid this potential problem, I do not advance a primer to the drop-ready position until I have moved the shell to the third station. I’ve also upgraded the crimp starter. After all is said and done, I feel like I have a reloader that is virtually indestructible and of the highest caliber. No pun intended. If a single stage reloader is what you are after, it is my opinion that you can not go wrong with the MEC 77. Happy reloading."
Would you recommend this product to a friend? Yes
Review 9 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
Really good,February 19, 2009
By Browninggirlfrom St. Louis, MO.
"I was very hesitant when my husband wanted to reload. It seemed complicated to me. It is so easy, it is amazing. This product makes it so easy and works so well I can't believe it. I can do it with no problems. The nice thing for me is I can change the load to my liking. You don't have as many options when you buy shells."
Would you recommend this product to a friend? Yes
Review 10 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
12 Ga. SizeMaster,February 6, 2009
By REDEfrom Kentucky
"Fantastic Press! I have owned/used Lee, Texan and MEC 600 (several), 650 shot shell presses in several gauges - the SizeMaster is my favorite. Smooth operation, simple, easy to switch between 2.75" and 3", accurate, solid collet resizer, auto primer feed... not sure what more you could want in a single stage press. The other reviews pretty much sum it up. I would add that I have found the powder drops to be consistent and accurate. I know because I weigh every 5th load (clays) and every load (Steel, Bismuth). If I notice a problem I weigh every load until it is resolved. If you notice inconsistency, no matter the press, you should shake your powder from time to time, a baffle helps too. Another thing, crimps were good and tight, no adjustment between AA, STS and GM hulls. Very few adjustsments needed when switching between 2.75" and 3" hulls. Great press, great company, would highly recommend."
Would you recommend this product to a friend? Yes
Review 11 for MEC® 77 Sizemaster Reloader
Overall Rating:
4
out of 5
Mec .410 Sizemaster almost perfect,December 15, 2008
By Kingerfrom East Greenbush, NY
"The MEC .410 Sizemaster does all that it is supposed to do with ease. The reloaded ammunition looks good and functions flawlessly, the only improvement I would suggest is an automatic primer feed."
Would you recommend this product to a friend? Yes
Review 12 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
Sizemaster,December 12, 2008
By BioBearfrom Tannersville, Pa
"Great reloader, simple and effortless to use, very tite crimp, in all a fine machine. very happy I chose this MEC product."
Would you recommend this product to a friend? Yes
Review 13 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
MEC Sizemaster,October 24, 2008
By RustyinCa
"I started reloading with a used 600jr. I enjoyed it so much, I now have new Sizemasters in 12ga and 20ga. I like the way the Sizemaster resizes the base of the shell and the auto primer feed. Good equipment."
"This product out does the 600 jr. with the better resizing die and ease of use. The only negatives I have are minor. One is cost of unit does not inlude the automatic primer feed,(does not come on the .410) which I think should be a reduction in price. The other is mechanical in nature. The safety bar to control the powder and shot sequence is not lined up properly and drags on the main spring"
Would you recommend this product to a friend? Yes
Review 15 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
Always a good choice!,September 9, 2008
By Uduckheadfrom Allen, TX.
"I bought both the 12 and 20 gauge model and have burned through thousands of rounds. This reloader keeps going and going. It's a MEC... enough said."
Would you recommend this product to a friend? Yes
Review 16 for MEC® 77 Sizemaster Reloader
Overall Rating:
4
out of 5
MEC Sizemaster,August 26, 2008
By Tommy67from Lawton, OK.
"Overall I am very pleased with the MEC Sizemaster. The price and shipping time were very good. I had to make significant adjustments to the reloader before I could produce a good shell. I understood the unit came from the factory mostly preadjusted. I used a combination of components to make sure that wasn't the problem. Once I got the adjustments set, the unit produced consistently good shells. My previous experience with MEC was a 600 jr. I got from a friend. If and when I am in the market for another reloader, it will be a MEC."
Would you recommend this product to a friend? Yes
Review 17 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
MEC Sizemaster,April 7, 2008
By alamogordo
"Excellent reloader, easy to use with good instructions. Came mostly set-up and properly adjusted right out of the box."
Would you recommend this product to a friend? Yes
Review 18 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
fast and efficient,February 7, 2008
By knkn
"works great turns out great shells in a hurry"
Would you recommend this product to a friend? Yes
Review 19 for MEC® 77 Sizemaster Reloader
Overall Rating:
4
out of 5
MEC Sizemaster,May 7, 2007
By Salmonslayer2from Sault Ste. Marie, Canada
"Over all, the unit is very easy to operate. The only problem I see with this unit is that you require a new "charge Bar" if you change Shot Loads. Unit would be much better if it had Shot Bushings and you just changed them instead of the bar."
Would you recommend this product to a friend? Yes
Review 20 for MEC® 77 Sizemaster Reloader
Overall Rating:
5
out of 5
MEC 77 Sizemaster Reloader,November 22, 2006
By UncleDuck
"I purchased the MEC 77 and set it up for 20 gage skeet loads. My wife and I have both used the reloader for several months now and loaded several thousand shells.
The MEC 77 is very easy to use -- even for a small woman. I can load a box of shells in less than 10 minutes. The quality of the reloads is very good -- almost factory-like. I have had no trouble with the reloader and strongly recommend it."
