FREE Shipping Details
Beavertail Surface-Drive Motors at Cabela's
s7_020734_999_01
Zoom InResetZoom OutView Larger

Shown: Beavertail Surface-Drive Motors

More Views:

Beavertail Surface-Drive Motors
Regular Price: 
$6,899.00
Item: IK-020734
Select from Chart


Add Multiple Items at Once |  Check Availability

View All Item Notes & Restrictions    

Beavertail Surface-Drive Motors

  • Premium performance with maintenance-free durability
  • Next-generation muck-pushing power
  • Geometrically reinforced aluminum frames
Built with a no-compromises, no-excuses approach for premium performance, and perfected with countless hours on the water for outstanding quality, these next-generation motors deliver extraordinary muck-pushing power with the most advanced surface-drive system on the market. Geometrically reinforced aircraft-grade aluminum frames and drive housings minimize weight and increase durability. Thrust-optimized stainless steel two-bladed props. Powered trim and tilt lifts the motor above the trailer plane. Super-reliable synchronous belt drives. Hassle-free electric clutches. Polished and balanced electroless plated drive shafts. Primed with a zinc-rich undercoat and with a flat marine powder-coated finish.

  • The 40hp Kohler Command PRO four-cycle V-twin engine delivers quiet, fuel-efficient operation. Power-tuned overhead valve technology. Horizontal shaft for maximum torque. Cast-iron cylinder bores for rugged durability. High-strength aluminum construction. Electric start. Weight: 262 lbs.
    Available: 16", 20".

  • The 35hp Vanguard™ offers relentless power and durability. V-twin overhead valve technology for less vibration and greater fuel economy. Dura-Bore cast-iron cylinder sleeves. High-performance cams. Digital spark advance module. Magnetron electronic ignition. Weight: 262 lbs.
    Available: 16", 20".

  • The 27hp Kohler delivers 27hp at 3,600rpm. Hassle-free electric start. Performance cam. Digital spark advance module. Weight: 230 lbs.
    Available: 16", 20".
    • Text Size: AAA

    Product Videos
    Overall Customer Rating: 
    2.3 out of 5
    2.3 out of 5
    1 out of 4(25%)customers would recommend this product to a friend.
    Share this product:
    FacebookDiggDelIcioUsTwitter
    Open Ratings Snapshot
    Rating breakdown 4 reviews
    5 Stars
    1
    4 Stars
    0
    3 Stars
    0
    2 Stars
    1
    1 Star
    2
    Open Ratings Snapshot
    Product ReviewsReview This Product
    Overall Customer Rating: 
    2 out of 5
    2 out of 5
    muddin
    Location:Dallas TX
    Age:26-35
    Gender:Male
    Would you recommend this product to a friend? No
    Great for what I paid but would not recommend.
    Date:
    I purchased the 27 hp version as a clearance item. Because I got such a great deal on clearance with warranty I am happy with my purchase. My model had the original mounting/trim plate. The locking "pin" is a joke not matter if it is the new or old as they're the same. DO NOT trailer this motor without a transom saver in place. The locking pin failed as a result of poor design causing the motor to fall while trailering. This fall caused a weld to fail. After inspection of the weld it was deamed a "cold" weld. The weld looks pretty and strong from the outside but does not have good penetration into the base metal. It took 3 weeks to get a replacement part under warranty. I immediately noticed the new part was welded differently and the pivoting point of the bracket was redesigned. Overall I am happy with the performance. It is well built in every other aspect and they have since corrected the poor manufacturing practices since their first generation. If you have to pay list or sale price go with another brand. If you have mechanical and welding ability for the right price this motor can be a steal!
    Was this review helpful to you?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
    Share this review:
    FacebookDiggDelIcioUsTwitter
    Overall Customer Rating: 
    1 out of 5
    1 out of 5
    capthub
    Location:Annapolis, Maryland
    Would you recommend this product to a friend? No
    bad deal
    Date:
    We purchesed the 1860 Beavertail boat with the Vanguard 35 surface drive motor. The boat is awesome and well built. The floatation pods work great. The problem we had was with the motor. On the way home from picking up the boat, the locking pin rattled out of the trim tilt set up. The first time we used the boat, there was a short in the wiring that made the motor cut off. We were towed in by a passing boater. The second time we tried to use the boat, we could not get a full throttle to make any speed because the cable had come loose. The third time we used the boat, a weld on the trim/tilt broke and we were towed in. All of this happened in deep water, we never made it to the shallow flats. The motor was welded at a marine repair shop. We were told the aluminum weld was done wrong from the start. Fortunate for us Cabelas allowed us to return the motor for a full refund. We have since re-powered the boat with a different mud motor and are having a great time hunting the mud flats.
    Was this review helpful to you?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
    Response from Cabela'sBy Beavertail, Product Information , August 10, 2011
    Advisement: 2011 Beaver tail Surface Drive Product Updates and Information

    1. The proper engagement of the locking pin on the Beavertail Surface Drive Motors is critical during transport. Due to the weight of this type of motor, the locking pin prevents the motor from stressing the tilt/trim actuator and causing damage to the unit during transport. Improper engagement while transporting will result in damage to the actuator and weld assembly. The warning and requirement have been highlighted additionally in the owner\u2019s manual.
    2. All Beavertail motors include enclosed terminals and heat shrink wrap on all wire runs to limit exposure to metal surfaces and moisture. This additional feature significantly reduces wear points and wire exposure instances attributed to \u201cshorting out\u201d events.
    3. Throttle cables are completely adjustable to control idle rev and govern top RPM. Dependant on use they do on occasion become loose and require adjustment over time and should be checked and adjusted periodically.
    4. We had on occasion received feedback from the field on the Tilt/Trim bracket weld assembly presenting stress cracks. In 2011 we have revised our bracket and welding specification to eliminate these occurrences. We have also found these failures to directly correlate with improper locking pin engagement during transport of the boat and motor.
    All Beavertail boats and motors are backed by a manufacturer\u2019s warranty against defects and failures as noted above. If you have experienced any problems with your motor or boat due to a manufacturing defect please contact your dealer or Beavertail directly.
    Share this review:
    FacebookDiggDelIcioUsTwitter
    Overall Customer Rating: 
    1 out of 5
    1 out of 5
    Wallhanger14
    Would you recommend this product to a friend? No
    Go with a different brand
    Date:
    I bought the 40 horse surface drive with the 1860 Beavertail boat. On the way home the pin that holds the motor from bouncing bent and started to rip away at the motor housing because it is to soft. The paint job had air bubbles in it where the paint was chipping off the motor when i picked it up. The throttle was set so 60% of the throttle was pressed down before the engine would rev. I brought the boat out for a drive and the DRIVESHAFT to the prop busted. Had to pull my boat by hand 1/2 mile up river to nearest boat landing. The motor had less then 45 minutes on it and never touched mud, just plain water. I new I was taking a gamble buying this surface drive since they haven't been on the market very long. But I thought I would give it a try since their other motors had a good rep. I was wrong.
    Was this review helpful to you?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
    Share this review:
    FacebookDiggDelIcioUsTwitter
    Overall Customer Rating: 
    5 out of 5
    5 out of 5
    duckman94
    Would you recommend this product to a friend? Yes
    beavertail
    Date:
    I just bought the beavertail surface drive i am really satisfide with it i would recomend it to anyone it is crazy what this thing can go through you wouldnt baleive it tell you ride in one,really if you are looking for a motor that is what to get
    Was this review helpful to you?YesYes|NoNo|(Report as inappropriate)(Report as inappropriate)
    Share this review:
    FacebookDiggDelIcioUsTwitter

    Beavertail Surface-Drive Motors
    HP Dry Weight (lbs.) Height Engine Manufacturer Frame Quantity Price
    35 262 16" Vanguard Power-coated alum.
    Regular Price: 
    $6,899.00
    *
    Ships Directly from Manufacturer
    35 262 20" Vanguard Power-coated alum.
    Regular Price: 
    $6,899.00
    *
    Ships Directly from Manufacturer
    • * Red Asterisks indicate items that will ship directly from the manufacturer.

    Recently Viewed

    See All 50 Items

    See All 50 Items

    You May Also Like

    Nissan Marine Four-Stroke Motors at Cabela's

    Nissan Marine Four-Stroke Motors

    $999.00 - $3,149.00
    Coleman® Four-Stroke Outboard at Cabela's

    NEW! Coleman® Four-Stroke Outboard

    Select items on sale!
    $649.00 - $2,699.00
    $649.00 - $2,699.00
    Beavertail Performance Flotation Pods at Cabela's

    Beavertail Performance Flotation Pods

    Sale!
    $399.00 - $449.00
    $239.99 - $289.99
    Mercury® Four-Stroke Outboard Motors at Cabela's

    Mercury® Four-Stroke Outboard Motors

    $889.00 - $3,579.00